Feature Compare

In the Feature Compare dialog box, ....

• Feature Compare: In the Feature Compare tab, you can select a Feature Extraction model and specify the data sources to be used for feature comparison. To specify data sources:

  1. In the Model field, select a model from the drop down list. The drop-down list displays all the Feature Extraction models that are connected to the model provider.

  2. Deselect Auto, if you want to enter a custom model. If Auto is selected, then the Column field automatically displays the column name based on the selected model.

  3. In the Data Input 1 and Data Input 2 fields, select a data provider node from the drop-down list respectively. If you want to enter a custom input, then select User Defined from the drop-down list, and enter the custom entry by clicking the corresponding Data Input cell in the model grid below.

  4. In the Case ID fields, select a supported column for each data provider node. If the Data Input field is set as User Defined, then the Case ID field is disabled.

  5. Click OK.

  The model grid displays the following:

  • Model Attribute: Displays partition columns, if any and input attributes from the model signature of the selected model.

  • Data Type: Displays the attribute of the data type.

  • Data Input 1: Displays the matching attribute or user defined data for Data Input 1.

  • Data Input 2: Displays the matching attribute or user defined data for Data Input 1.

• Additional Output: In the Additional Outputs tab, the selected Case IDs and partition columns added in the Feature Compare tab are added here, when Automatic Setting is set to On. You can also add any model attributes as additional columns for output.